Teach you how to use the pen correctly
How to extend the use time of the pen, good habits can make our pens use for a long time, and keep a good writing feeling. Here we will introduce the correct use and habits of the pen.
First, the correct use of the pen
1 The gold pen tip should be written on the front side. The front end of the sheet metal pen tip will become thicker and can be written on both sides.
2 The ink should be fixed. When using another ink, it should be cleaned and then sucked.
3 In the skin tube, it is necessary to keep the ink constantly, so that the air does not increase, and the water is too urgent or leaks.
Second, after writing the word, you must buckle the cap.
This protects the nib and does not affect the writing of dry ink. When the pen falls, the cap will protect the nib. Some people have introduced the experience that it is best to put the cap on the end of the pen when writing. In this way, 10,000 strokes fall, the tail is heavier, and the nib does not touch the ground first. It is also a way to protect the nib. (The pen of the metal case is best not to buckle like this, it is easy to wear the outer coat coating).
Third, before the pen is used:
1. Rotating pen
a. Wipe the structure inside the pen clean.
b. Extrude the ink with hot water. (Specific practice: soak in hot water)
c. Soak the pen tip with hot water alone. (5 minutes)
d. Remove and wipe the nib.
e. Assemble the pen and use it after 5 minutes.
1, tubular (ie squeezed by hand)
a. Wipe the structure inside the pen clean.
b. Remove the pen back cover.
c. Place the nib into a cupped cup with hot water and cover with a lid for 10 minutes. (Note: the water should not be too hot, otherwise it will burn the hose!)
d. Remove the lid, pinch the hose off the back cover of the pen, and lift the ink out of the hose at a position 3 mm away from the water surface.
e. The pen is warm and can be filled with new ink.
Tips on the nib: Place the nib on the glass plate, squeeze it from side to side, slowly flatten the nib, then rub the nib back and forth on the glass to smooth the nib to prevent the paper from being scratched. that's it.
Fourth, the pen is not smooth water solution
1. Use warm water to soak the tip of the pen. After the water is cool, the ink that has solidified in the pen is also opened. At this time, the pen can be washed again.
2, first wash with water, then use the washing powder to soak the water back and forth, then wash with clean water, this will be very smooth.
3. If there is no physical damage to the pen tip, the pipe should be blocked by the dross in the ink.
4. The razor blade draws the slit on the tip of the pen. If you want to thoroughly clean the tip of the pen, you can use a nail clipper to gently pinch the tip of the pen. Note: not every pen tip can be pulled out, but I try Most of them can be.
Fifth, the use of ink
It is best to use the same brand of ink. Good ink won't damage your pen.
Every time you don't have to smoke too much ink, some pens will have too much water when the water is full.
Also don't mix different inks together, which is the most traumatic.
Note: Never use ink as ink! Because there is glue in the ink!
6. After using for a period of time, it should be cleaned.
Disassemble the pen and immerse the water aspirator and pen item (ie the part that connects the water aspirator and the nib) in warm water overnight. Insert the ink aspirator, immerse the pen tip in warm water, then hold the middle of the ink aspirator with your hand, squeeze the ink aspirator until it is cleaned, and then dry it with a soft cloth.
If the cleaning is not effective, you can try it with alcohol, but be careful, otherwise you will welcome a new look!
Seven, don't be greedy and write on the tip of the pen
If you like the words of fine strokes, then buy a special pen. Don't write on the tip of your pen. Many people have written in detail, and I have done this before. The result: the writing of the pen tip is very sharp, the writing is very uncomfortable, the nib will become thicker and thicker, and the pen of poor quality will crack.
Eight, pen pen pole crack bonding method
The pen pen is broken, scrubbed and dried, and then bonded with 502 glue. The glue should not be too much, but it should be painted evenly. After coating, squeeze and bond firmly, fix with rope, wipe out the extruded glue, leave it for 5-10 minutes, and dismantle the bindings. If the rod made of polystyrene plastic is bonded with a solvent such as toluene or ethyl acetate.
Nine, other
When writing, you should put some manuscript paper under the paper to enhance the elasticity of the nib and reduce friction.
Do not write on the tip of a hard material such as metal to prevent damage to the nib.
The pen should be cleaned once a month or so to keep the ink flowing.
If the pen is not used for a long time, it should be washed and stored.
The above is the introduction to teach you the correct use of the pen, I hope to help everyone.
When you cooking ,you will face on some problems .For example, the oven lid is too hot to touch , the fire always crush out,when fired the smoke is big .Our bbq accessories will help you when you search our net. The lid lifter for dutch oven keep safety and put on the lid of an oven during cooking .The smoker box add more special flavour of food.The charcoal box help to fire quickly and less smoke.The fire fan and fire starter help to make a fire easily!
Bbq Accessories,Bbq Fan,Plastic Fan,Bbq Hand Fan
MEO DEMO CO., LTD. , https://www.meobbqtools.com